I took some pics I'll try to post one once I get to work. It was almost too short and had to swap one of the hardened washers to a thinner washer to ensure I had threads past the nylock (I used a washer on the backside of the frame mount which is probably unnecessary I suppose). Yea I used 2 25mm and 2 30mm bolt, but I'd get 4 30's if you can, I would like a little extra thread on the 2 bolts holding the chain to the frame, I used the stock bolts from the seat belts for that. Been slow going, but I usually don't start till 10:00 at night and I work until about 1:00. Sounds like they are unbolting the floor on the inside right? I need to find a video to figure out what needs to come off I guess, and where to trim the seat (don't understand why that is needed). Click to expand.Yea I need to go drive the thing before I tear out the sub-frame.
